The EZ-BridgeLT-HD™ is a high power 250mW outdoor wireless bridge system with built in Ethernet and AC Power surge protection for ultra reliable operation in harsh environments. The complete system comes with two 75' Shielded outdoor rated Cat5 cable assemblies to protect against EMI caused by lightning. The system operates in the 5GHz unlicensed frequency spectrum providing real world thruput up to 20 Mb/sec. It complies with the 802.11a standard to insure interoperability. The EZ-BridgeLT-HD™ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-BridgeLT-HD™ units can be connected in a mesh configuration to allow interconnecting more than two sites. With its password verification, MAC address authentication, SSID suppression and advanced WPA2 encryption, the system provides the best available wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-BridgeLT-HD™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 19dBi 802.11a antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected 18V POE (Power Over Ethernet) power inserters and 75' Shielded Outdoor Rated CAT5 cable assemblies. For the full detailed spec sheet click here.
The system operates in the 5GHz unlicensed frequency spectrum providing real world thruput up to 20 Mb/sec. It complies with the 802.11a standard to insure interoperability. The EZ-BridgeLT-HD™ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-BridgeLT-HD™ units can be connected in a mesh configuration to allow interconnecting more than two sites. With its password verification, MAC address authentication, SSID suppression and advanced WPA2 encryption, the system provides the best available wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-BridgeLT-HD™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 19dBi 802.11a antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected 18V POE (Power Over Ethernet) power inserters and 75' Shielded Outdoor Rated CAT5 cable assemblies. For the full detailed spec sheet click here.
With its password verification, MAC address authentication, SSID suppression and advanced WPA2 encryption, the system provides the best available wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-BridgeLT-HD™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 19dBi 802.11a antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected 18V POE (Power Over Ethernet) power inserters and 75' Shielded Outdoor Rated CAT5 cable assemblies. For the full detailed spec sheet click here.
Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-BridgeLT-HD™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 19dBi 802.11a antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected 18V POE (Power Over Ethernet) power inserters and 75' Shielded Outdoor Rated CAT5 cable assemblies. For the full detailed spec sheet click here.
The EZ-BridgeLT-HD™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 19dBi 802.11a antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected 18V POE (Power Over Ethernet) power inserters and 75' Shielded Outdoor Rated CAT5 cable assemblies. For the full detailed spec sheet click here.
For the full detailed spec sheet click here.
Your order secured by SSL. 256bit TLS also supported!
We accept....
